6V-90V 15A DC Motor Pump Speed Controller Of Stepless Speed Regulating Switch
- Our Wholesale Price includes Shipping & Handling Charges and GST
- Processing time3~10 days
Stepless speed switch motor drive module Connect it to the power, ensure the positive inversion switch located in the middle of the zero, and connected with a DC power supply(the DC supply voltage range is more than 6V and less than 90V). Warning: do not reverse the positive and negative terminals of DC power source, otherwise regulator may be damaged.
Connect it to the motor, the motor line can be positive or negative, when the running direction is not consistent with the expectative one, you can adjust the sequence of lines or switch position to change the direction.
Adjust the switch. Positive inversion switch is used to control the motor speed direction. When the switch is located on the zero position, the motor stops rotating.
Adjust the potentiometer knob. Adjusting potentiometer knob can change output duty ratio of the regulator, then motor speed change.
High efficiency, high torque, low heat generating Control the speed of a DC motor with this controller With reverse polarity protection, high current protection and potentiometer and reversible switch
Product Name: 6/9-15A
Input voltage: DC6V-90V
Output voltage: linear under load
Output current: 0-15A
Continuous current: 10A
Speed control type: flow adjustment
Speed control mode: potentiometer (linear)
Speed range: 0 - 100%
Control frequency: 16KHZ
Reverse polarity protection: there are triodes
Overload protection: with fuse type
Wiring type: fence terminal block
Knob line length: 20cm / 7.87inch
Module size: length x width x height 71 x 61 x 27mm / 2.8 x 2.40 x 1.06inch
Product net weight: 76 grams
Motherboard installation size: length x width 53 x 63mm / 2.09 x 2.48inch
Potentiometer press to open the hole: 7mm / 0.28inch
1 Piece Motor Drive Module